		PMON Targets
		PMON Targets

PMON supports any of LSI Logic's Evaluation boards as a Target.  Each
PMON target needs to be equipped with a set of suitably configured PMON
Proms.  This package currently builds for the following boards.

BDMR400x (4001/2/3) Evaluation Board

    Insert the four flash memories containing PMON in U8,
	U19, U29, and U40. Note that this board can be configured for
	big or little endian byte ordering (J1).
    Connect a serial cable from U28 to the 
	Host.

BDMR4101 (4101) Evaluation Board

    Insert the four flash memories containing PMON in U5,
	U6, U7, and U8. Note that this board can be configured for
	big or little endian byte ordering (J1).
    Connect a serial cable from J28 to the 
	Host.

BDMR4102 (4102) Evaluation Board

    Insert the EPROM containing PMON in U25.
    Connect a serial cable from J10 to the 
	Host.

Nitro (4010) Evaluation Board

    Insert the flash memory containing PMON in U18.
    Connect a serial cable from J18 to the 
	Host.

Nitro II (4011) Evaluation Board

    Insert the EPROM containing PMON in U4.
    Connect a serial cable from J19 to the 
	Host.

SDP1000 (64008) RevA Evaluation Board

    Insert the two flash memories containing PMON in U42 and U44.
    Connect a serial cable from CON9 to the 
	Host.

SDP1000 (64108) RevB Evaluation Board

    Insert the two flash memories containing PMON in U50 and U49.
    Connect a serial cable from port1 to the 
	Host.

ATMizer-2 RT Platform

    Build two PMON configuartions: one for the ATMizer-2 Host, and one
    for the ATMizer-2 Sar. Insert the two flash memories in the respective
    sockets.
    Connect two serial cables to the 
Host: one from the Host-board's tty0, and
one from the Sar-board's tty0.


Navigation: 
Document Home | 
Document Contents | 
Document Index 

